|商品名稱：||BeatSkillz Valvesque v2.0.0 MacOSX-失真均衡器插件|
- 回上一頁您可能感興趣：BeatSkillz Valvesque v2.0.0 MacOSX-失真均衡器插件The warmth and crunch that certain great valve gear brought to classic recordings is still missed today. Although many companies have tried to emulate classic valve hardware, we developed a proprietery new method for getting an authentic valve emulation
Distortion Types A (Triode) & B (Pentode): Mode 1 has a smoother tone and upon moving towards mode 6 the tone becomes edgier resulting in more breakup of the sound. Both A & B Distortion types have different characteristics on all 6 modes.
Input Gain / Stereo Link:
Input Gain drives the signal harder into the valve circuit dialing in more distortion. Adjust this control as a drive control for more or less saturation
The Stereo Link switch enables the channel link mode for the 2 channels. So the Left channel will also control the right channel settings
The Bass gain peaks at a frequency of 65Hz. The Bass Cut is a high pass filter. The Mid/ High-frequency boost control gives a bell type curve at 2.5kHz / 4kHz /12kHz, selectable. The ‘Mid Cut’ cuts mid frequencies at 1kHz. The ‘LPF – Low Pass Frequency’ control will allow the high frequencies to be cut when excessive distortion is used, smoothing the resulting sound.
Post/ Pre EQ Button (New): Put the EQ section before or after the Distortion Section
Smooth Mode Button (New): Makes the signal louder with less harsh peaks
Wet/Dry Fader (New): A Wet/Dry Mix control allowing you to mix in as much of the processed signal as needed
Updates: official site does not provide any info about changes in this version.